Your location:Index >> Movable Table Hydraulic Machine Movable Table Hydraulic Machine

FBY-MTC10 Series of Movable Table Hydraulic Machine



Product Feature

1.C type body,the body after high temperature aging treatment,good rigidity small deformation.

2.In order to ensure the safety of operator, configuration of the mobile worktable (pushing cylinder) makes the feeding,feeding in the head outside the security zone; for the relatively large size installation and disassembly need space largeworkpiece; pressing precision is equivalent to the traditionalhydraulic machine.

3.Using PLC control, on the screen to set arbitrary movement speed, pressure, time, under the pressure of high position precision, reliable performance.

4.Equipped with hydraulic sensor and pressure sensor, display the actual pressure, can set the pressure detection range, product testing the pressing is qualified, product in the pressing process of undervoltage automatic alarm and shutdown.

5.Hydraulic system pressure stable performance, high precision, large range of adjusting pressure.

6.Safety design of automatic operation and hand operation, with emergency stop and jog up and down function.

7.Spindle down with the fast and boost work into two kinds of speed, the fast forward improve work efficiency, pressure feeding speed can be adjusted in a certain range, improve product assembling quality, protect the mould and products.

8.Using the manual button and the pedal two cycle start modes.

9.The control system adopts imported famous brand products, high-end PLC, touch screen by Siemens, Mitsubishi, valiant and other high-end brands, hydraulic system adopts imported double proportional valve system (see the specific configuration configuration list).

10.The seal using the NOK and Taiwan tripod base.

11.Infrared operation safety induction device (according to customer demand matching).

12.Failure warning, pre-diagnosis, fault diagnosis function (optional).

 

 


Technical Parameters

The specific technical data, Please contact our staff of the company

型號Model
H
H1
H2
S
S1
S2
W
FBY-MTC10
1975
800
210
1240
200
450
780

 

Specifications
規格
單位/ UNIT
BY-MTC10
Theoretical pressure
理論壓力
KN
100(10T)
Rated oil pressure
額定油壓
Mpa
12
Max stroke
最大行程
mm
 
Daylight Opening Height
最大開口高度
mm
 
Throat Depth
喉深
mm
 
Down speed
快進速度
mm/s
 
Pressing speed
工進速度
mm/s
 
Return speed
回程速度
mm/s
 
Push the cylinder stroke
推缸行程
mm
 
Push the cylinder speed
推缸速度
mm/s
 
The size of the bed
移動工作臺尺寸
mm
 
The height of the bed
工作臺距地面高度
mm
 
Motor power
油泵電機功率
Kw
 
Power(3фAC,50Hz)
電源(3фAC,50Hz)
V
 
Weight
重量
Kg
 
Fuel tank capacity
油箱容量
L
 

 


 

點擊這里給我發消息

點擊這里給我發消息

點擊這里給我發消息



點擊這里給我發消息

點擊這里給我發消息

Call me!

Call me!





意甲虎扑 吉林11选5开奖结果 上海11选5前三组遗漏 单双中特免费公开 上海今天11选五开奖号 王中王四不像精选资料 刘伯温精选六资料大全 11选5前三组选万能秘籍 北京11选5开奖时间 黑龙冮11选5一定牛 河北11选五遗漏查询